Are you looking to extend your fence system further? or purchase an larger fence run. Then you are in the right place. If you wish to extend your fence a further...
Are you looking to extend your fence system further? or purchase an larger fence run. Then you are in the right place. If you wish to extend your fence a further 39" from the 40" you already have, just choose the size you require. the numbers will be laser-marked to carry on from your own fence
Our new specially designed fence system for the use of Festool tops or any other tops with a 20mm hole is able to fix your fence and allow for repeatable cuts without losing valuable space behind the fence, allowing your MFT top to be closed to a wall and to save space.
Scroll down to the demonstration video below on how to use the Fence System.
Due to changes in artwork, there may be some differences in laser markings. This doesn’t cause an issue with the following but might be in a slightly different position on the fence. This will only occur when buying your original fence prior to Feb 2024. If this is not suitable, we will advise you to purchase the complete fence extrusion.
Please note that the Quad Fence Dogs do not allow you to remove your fence by detaching it from the fence. These are more suited if you have your fence permanently positioned on your MFT.
If you require 3/4" Quad Fence Dogs® please add a note at the checkout before ordering.
The set is fairly accurate. I measured all of them and the most accurate setup block was the 1mm, which measured 1.01mm. Well within tolerances for wood working. The thing that I wasn't impressed with, was the finish. You can see the swirl machining marks on every block, with the 25x75x50 block showing the most. I will admit I don't have much experience with setup blocks. My only other set is imperial brass and they are perfectly smooth. It may just be a difference in materials.
I do want to celebrate the mini sustainer and it's clever design. I can't help but smile every time I open it!